Wiznet WIZ-Embedded WebServer Manuel d'utilisateur télécharger pdf (Page 27)

WIZ-600Wi User Manual

à UART(RS232) CONFIGURATION

- Use Serial Converter : It selects using RS232 data transmission mode or not.

- Operation Mode : RS232 data transmission should be processed through server

and client type. If one side operates as server, the other side does as client.

- Server IP : When operated as Client mode, input server IP address. At the server

mode, this value is ignored.

- TCP Port : Input TCP port number for data transmission. The same value should

be applied for both of server and client.

- Use Flow Control : It selects ‘Use Flow Control’ for RS232 communication.

- Baud rate : It configures baud rate for RS232 communication.

- Data Bit : It configures data bit

- Parity : It configures parity value

2.2.8. Administrator

Figure 14. Configuration Tool – Administrator

à USER CONFIGURATION

It configures AP name, user ID and password.

- AP Name : It configures the name of current AP.

- User Name : It configures User ID to be connected to the AP.

- Password : It configures User Password to be connected to the AP.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 41 42

Pas de commentaire

Wiznet WIZ-Embedded WebServer Manuel d'utilisateur Page 27